This is from my FreeBSD-HEAD 802.11n access point, currently doing ~ 130MBit/s TCP:
# athstats -i ath0
41838297 data frames received
31028383 data frames transmit
78260 short on-chip tx retries
3672 long on-chip tx retries
197 tx failed 'cuz too many retries
MCS13 current transmit rate
8834 tx failed 'cuz destination filtered
477 tx frames with no ack marked
239517 rx failed 'cuz of bad CRC
10 rx failed 'cuz of PHY err
10 OFDM restart
42043 beacons transmitted
143 periodic calibrations
-0/+0 TDMA slot adjust (usecs, smoothed)
45 rssi of last ack
51 avg recv rssi
-96 rx noise floor
812 tx frames through raw api
41664029 A-MPDU sub-frames received
42075948 Half-GI frames received
42075981 40MHz frames received
13191 CRC errors for non-last A-MPDU subframes
129 CRC errors for last subframe in an A-MPDU
2645042 Frames transmitted with HT Protection
351457 Number of frames retransmitted in software
23299 Number of frames exceeding software retry
30674735 A-MPDU sub-frame TX attempt success
374408 A-MPDU sub-frame TX attempt failures
8676 A-MPDU TX frame failures
443 listen time
6435 cumulative OFDM phy error count
161 ANI forced listen time to zero
3672 missing ACK's
78260 RTS without CTS
1469003 successful RTS
239605 bad FCS
2 average rssi (beacons only)
Antenna profile:
[0] tx 1466665 rx 1
[1] tx 0 rx 41838296
Excellent!
ReplyDeleteI'm sorry, I have a small question: will it be in stable-9?
ReplyDeleteI have no plans to merge the ath(4) support into -9. The changes are really quite large. I needed to rearchitect the entire TX path.
ReplyDelete